nginx反向代理配置及优化

前言:

由于服务器apache抗不住目前的并发.加上前端squid配置后,问题依然无法解决.而页面程序大部分是动态.无法使用fastcgi来处理.因此想使用nginx做为反向代理apache.整个配置安装过程很简单.在考虑高并发的情况下,在安装前就做了些优化.目前配置能抗住3000以上并发.好像不是特别大哦?呵~~ 但足以~~ 只是还有少量499问题..期待有人跟我讨论解决

第1部分:安装 1 建立用户及组

/usr/sbin/groupadd www /usr/sbin/useradd -g www www

2 安装pcre 让nginx支持rewrite 方便以后所需

wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-7.8.tar.gz tar zxvf pcre-7.8.tar.gz cd pcre-7.8/ ./configure

make && make install

3 安装nginx

wget http://sysoev.ru/nginx/nginx-0.7.58.tar.gz tar zxvf nginx-0.7.58.tar.gz cd nginx-0.7.58/

./configure --user=www --group=www --prefix=/usr/local/webserver/nginx --with-http_stub_status_module --with-http_ssl_module --with-cc-opt='-O2' --with-cpu-opt=opteron make && make install

#注意上文中的--with-cc-opt='-O2' --with-cpu-opt=opteron 这是编译器优化,目前最常用的是-02 而不是3.后面对应CPU的型号,可参照:http://wiki.gentoo.tw/index.php/HOWTO_CFLAG

第2部分:配置及优化配置文件 1 nginx.conf 配置文件: user www www; worker_processes 4;

# [ debug | info | notice | warn | error | crit ]

error_log /usr/local/webserver/nginx/logs/nginx_error.log crit; pid /usr/local/webserver/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.

worker_rlimit_nofile 51200; events {

use epoll;

worker_connections 51200; } http {

include mime.types;

default_type application/octet-stream; source_charset GB2312;

server_names_hash_bucket_size 256; client_header_buffer_size 256k; large_client_header_buffers 4 256k;

#size limits

client_max_body_size 50m; client_body_buffer_size 256k; client_header_timeout 3m; client_body_timeout 3m; send_timeout 3m;

#参数都有所调整.目的是解决代理过程中出现的一些502 499错误 sendfile on;

tcp_nopush on;

keepalive_timeout 120; #参数加大,以解决做代理时502错误 tcp_nodelay on;

include vhosts/upstream.conf; include vhosts/bbs.linuxtone.conf; }

2 upstream.conf 配置文件(这也是做负载的配置方法) upstream.conf

upstream bbs.linuxtone.com { server 192.168.1.4:8099; }

3 站点配置文件

bbs.linuxtone.conf server {

listen 80;

server_name bbs.linuxtone.conf; charset GB2312;

index index.html index.htm; root /date/wwwroot/linuxtone/;

location ~ ^/NginxStatus/ { stub_status on; access_log off; }

location / {

root /date/wwwroot/linuxtone/; proxy_redirect off ;

proxy_set_header Host $host;

proxy_set_header X-Real-IP $remote_addr; proxy_set_header REMOTE-HOST $remote_addr;

proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 50m; client_body_buffer_size 256k; proxy_connect_timeout 30; proxy_send_timeout 30; proxy_read_timeout 60; proxy_buffer_size 256k; proxy_buffers 4 256k;

proxy_busy_buffers_size 256k; proxy_temp_file_write_size 256k;

proxy_next_upstream error timeout invalid_header http_500 http_503 http_404;

proxy_max_temp_file_size 128m; proxy_pass http://bbs.linuxtone.com; }

#参数都有所调整.目的是解决代理过程中出现的一些502 499错误 #Add expires header for static content location ~* \\.(jpg|jpeg|gif|png|swf)$ { if (-f $request_filename) { root /date/wwwroot/linuxtone/; expires 1d; break;

} }

log_format access '$remote_addr - $remote_user [$time_local] \"$request\" '

'$status $body_bytes_sent \"$http_referer\" ' '\"$http_user_agent\" $http_x_forwarded_for'; access_log /exp/nginxlogs/bbs.linuxtone_access.log access; }

注:第二种代理方式

nginx 处理下图片,html等静态的东西.其它动态由apache处理.因此apache也需要做一些参数调整.

设置图片等过期时间.缓解请求.

如果源与nginx在同一台机器建议使用如下方法: location / {

proxy_pass http://192.168.1.4:8099/; proxy_redirect default ; }

针对不同的目录进行代理把下面的配置放到根目录代理的上面 location /linuxtone/ {

proxy_pass http://192.168.1.4:8099/linuxtone/; proxy_redirect default ; }

4 源配置

ServerAdmin liuyu105#gmail.com DocumentRoot /date/wwwroot/linuxtone ServerName bbs.linuxtone.com ErrorLog logs/linuxtone_error_log

CustomLog \"|/usr/local/sbin/cronolog logs/linuxtone_access_log.%Y%m%d\" combined

第3部分:源的优化 1 apache-mpm.conf

StartServers 15 MinSpareServers 15 MaxSpareServers 30 ServerLimit 2536 MaxClients 2048 MaxRequestsPerChild 1500

2 apache-keepalive

Timeout 120 #与nginx的保持一至 KeepAlive On

MaxKeepAliveRequests 400 KeepAliveTimeout 7

第4部分:PHP的优化

优化一:将PHP由之前的xcache换成eaccelerator 1 安装

wget http://bart.eaccelerator.net/source/0.9.5.3/eaccelerator-0.9.5.3.tar.bz2 tar jxvf eaccelerator-0.9.5.3.tar.bz2 cd eaccelerator-0.9.5.3/

/usr/local/webserver/php/bin/phpize

./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php5/bin/php-config make make install

注:PHP路径以安装为准! 2 配置

sed -i 's#extension_dir = \"./\"#extension_dir = \"/usr/local/php5/lib/php/extensions/no-debug-non-zts-20060613/\"\\nextension = \"memcache.so\"\\n#' /etc/php.ini

sed -i 's#output_buffering = Off#output_buffering = On#' /etc/php.ini sed -i \"s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g\" /etc/php.ini

配置eAccelerator加速PHP：

mkdir -p /usr/local/webserver/eaccelerator_cache vi /etc/php.ini

按shift+g键跳到配置文件的最末尾，加上以下配置信息：

[eaccelerator]

zend_extension=\"/usr/local/php5/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so\"

eaccelerator.shm_size=\"128\"

eaccelerator.cache_dir=\"/usr/local/webserver/eaccelerator_cache\" eaccelerator.enable=\"1\" eaccelerator.optimizer=\"1\" eaccelerator.check_mtime=\"1\" eaccelerator.debug=\"0\" eaccelerator.filter=\"\" eaccelerator.shm_max=\"0\" eaccelerator.shm_ttl=\"300\"

eaccelerator.shm_prune_period=\"120\" eaccelerator.shm_only=\"0\" eaccelerator.compress=\"1\" eaccelerator.compress_level=\"9\"

优化二:联系开发重新编译php减少php的模块.以减少php进程所占用内存数.这块尽管影响不大,但也有一定的作用.编译前也可以参照nginx的编译器优化方式安装.

第5部分:测试并启动nginx ulimit -SHn 51200

/usr/local/webserver/nginx/sbin/nginx -t /usr/local/webserver/nginx/sbin/nginx

第6部分:nginx日志切割脚本 #!/bin/bash

# This script run at 00:00

# The Nginx logs path logs_path=\"/exp/nginxlogs/\"

mkdir -p ${logs_path}$(date -d \"yesterday\" +\"%Y\")/$(date -d \"yesterday\" +\"%m\")/

mv ${logs_path}bbs.linuxtone_access.log ${logs_path}$(date -d \"yesterday\" +\"%Y\")/$(date -d \"yesterday\" +\"%m\")/bbs.linuxtone_access_$(date -d \"yesterday\" +\"%Y%m%d\").log

kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`

crontab -e

00 00 * * * /bin/bash /usr/local/webserver/nginx/sbin/cut_nginx_log.sh