注塑工艺参数对防眩板力学性能的影响

陈乐平;单磊

【期刊名称】《工程塑料应用》 【年(卷),期】2012(40)3

【摘 要】以防眩板为例,结合Moldflow和ANSYS软件,将Moidflow分析后的节点、单元数据,各单元的材料属性,热膨胀系数值,残余应力值及分子和纤维取向角度等导入到ANSYS进行结构分析,研究了各注塑工艺参数对防眩板成型后力学性能的影响.结果发现,保压时间、熔体温度及模具温度对防眩板力学性能的影响较大,而注射速率及保压压力的影响较小.采用较长的保压时间、较低的熔体温度和模具温度,以及稍快的注射速率可制得力学性能较好的防眩板.该研究结果对提高注塑件的结构分析精度将有极大的现实意义.%Taking anti-glare board for example and combining Moldflow and ANSYS software, the node and element data, material properties of each element, thermal expansion coefficient, residual stress and molecular and fiber orientation angle gained from Moldflow analysis were imported into ANSYS for structural analysis, then the influences of injection process parameters on the mechanical properties of anti-glare board after molding were studied. The results showed that packing time, melt temperature and mould temperature had great influence on the mechanical properties of anti-glare board but injection rate and packing pressure had few influence. Anti-glare board with good mechnical properties could be prepared by adopting longer packing time, lower melt temperature, lower mould temperature and slight

faster injection rate. The results of the study had great realistic significance in the respect of improving the structural analysis accuracy of injection molding parts.

【总页数】4页(P53-56) 【作 者】陈乐平;单磊

【作者单位】浙江纺织服装职业技术学院机电学院,宁波315211;浙江纺织服装职业技术学院机电学院,宁波315211 【正文语种】中 文 【中图分类】TQ320.66 【相关文献】

1.工艺参数对防眩板注射残余应力的影响分析 [J], 陈乐平 2.高速公路用防眩板整体力学性能牵引装置研究 [J], 陈晓豪

3.注塑工艺参数对微发泡PP/SiO2纳米复合材料发泡行为及力学性能的影响 [J], 龚维;高家诚;何力;于杰;郑环;何颖

4.酚醛树脂含量及压合次数对HDI印制电路板基板耐热性及力学性能的影响 [J], 陶平均;孟昭光;谢至薇;叶志;何玉定;徐学军;曾国权

5.注塑工艺参数对汽车右A柱下饰板翘曲变形的影响 [J], 刘强;史双喜

因版权原因，仅展示原文概要，查看原文内容请购买