富士康~群创7寸TN92模组规格书AT070TN92 P(V01)_2009.1.12

INNOLUX DISPLAY CORPORATION

LCD MODULE

SPECIFICATION

Customer: SPEC NO.: Date: Version:

■Preliminary Specification □Final Specification

For Customer’s Acceptance

Approved by

Comment

A070-92-TT-01 2009/01/12 01

Model Name: AT070TN92

Approved by

Reviewed by

Prepared by

Joe Lin

2009/02/12

James Yu

David Lee Jack Huang

Charlie Chou

2009/02/12

2009/02/11

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

InnoLux copyright 2004 All rights reserved, Copying forbidden.

Record of Revision

Version Pre-Spec.01

Revise Date Page 2009/01/12

Content

Initial Release

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX

Contents

1. General Specifications............................................................................................................1 2. Pin Assignment.......................................................................................................................2 3. Operation Specifications.........................................................................................................5 3.1. Absolute Maximum Rating..............................................................................................5

3.1.1. Typical Operation Conditions..................................................................................6 3.1.2. Current Consumption.............................................................................................7 3.1.3. Backlight Driving Conditions...................................................................................7 3.2. Power Sequence............................................................................................................8 3.3. Timing Characteristics....................................................................................................9 3.3.1. AC Electrical Characteristics..................................................................................9 3.3.2. Data Input Format.................................................................................................10 3.3.3. Timing...................................................................................................................11

4. Optical Specifications............................................................................................................12 5. Reliability Test Items.............................................................................................................16 6. General Precautions.............................................................................................................17

6.1. Safety...........................................................................................................................17 6.2. Handling.......................................................................................................................17 6.3. Static Electricity............................................................................................................17 6.4. Storage.........................................................................................................................17 6.5. Cleaning.......................................................................................................................17 7. Mechanical Drawing.............................................................................................................18 8. Package Drawing.................................................................................................................19

8.1 Packaging Material Table..............................................................................................19 8.2 Packaging Quantity......................................................................................................19 8.3 Packaging Drawing.......................................................................................................20

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:1/20

1. General Specifications

No. 1 2 3 4 5 6 7 8 9 10 11 12 13

LCD size Driver element Resolution Display mode Dot pitch Active area Module size Surface treatment Color arrangement Interface

Item

Specification

7.0 inch(Diagonal) a-Si TFT active matrix 800 × 3(RGB) × 480

Normally White, Transmissive 0.02(W) × 0.1790(H) mm 154.08(W) × 85.92(H) mm 1.9(W) ×100.0(H) ×5.7(D) mm Anti-Glare RGB-stripe Digital

Note 1

Remark

Backlight power consumption TBD Panel power consumption Weight

TBD TBD

Note 1: Refer to Mechanical Drawing.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:2/20

2. Pin Assignment

TFT LCD Panel Driving Section

FPC Connector is used for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hirose. Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Symbol VLED+ VLED+ VLED- VLED- GND VCOM DVDD MODE DE VS HS B7 B6 B5 B4 B3 B2 B1 B0 G7 G6 G5 G4 G3 G2

I/O P P P P P I P I I I I I I I I I I I I I I I I I I

Function

Power for LED backlight (Anode) Power for LED backlight (Anode) Power for LED backlight (Cathode) Power for LED backlight (Cathode) Power ground Common voltage Power for Digital Circuit DE/SYNC mode select Data Input Enable Vertical Sync Input Horizontal Sync Input Blue data(MSB) Blue data Blue data Blue data Blue data Blue data Blue data Blue data(LSB) Green data(MSB) Green data Green data Green data Green data Green data

Remark Note 1 Note 2 Note 2

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:3/20

26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 GND DCLK GND L/R U/D VGH VGL AVDD RESET NC VCOM DITHB GND NC NC

I I I I I I I I I I P I P I I P P P I - I I P - -

Green data Green data(LSB) Red data(MSB) Red data Red data Red data Red data Red data Red data Red data(LSB) Power Ground Sample clock Power Ground Left / right selection Up/down selection Gate ON Voltage Gate OFF Voltage Power for Analog Circuit Global reset pin. No connection Common Voltage Dithering function Power Ground No connection No connection

Note 2 Note 2 Note 2 Note 2 Note 3 Note 4,5 Note 4,5 Note 6 Note 7

I: input, O: output, P: Power

Note 1: DE/SYNC mode select. Normally pull high.

When select DE mode, MODE=”1”, VS and HS must pull high. When select SYNC mode, MODE= ”0”, DE must be grounded.

Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be

grounded.

Note 3: Data shall be latched at the falling edge of DCLK.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:4/20

Note 4: Selection of scanning mode

Setting of scan control input

U/D GND DVDD GND DVDD

Note 5: Definition of scanning direction. Refer to the figure as below:

L/R DVDD GND GND DVDD

Scanning direction Up to down, left to right Down to up, right to left Up to down, right to left Down to up, left to right

Up Left Right Down

Note 6: Global reset pin. Active low to enter reset state. Suggest to connect with an RC

reset circuit for stability. Normally pull high.

Note 7: Dithering function enable control, normally pull high. When DITHB=”1”,Disable internal dithering function, When DITHB=”0”,Enable internal dithering function,

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:5/20

3. Operation Specifications

3.1. Absolute Maximum Ratings

(Note 1)

Values

Item

Symbol

Min.

DVDD AVDD

Power voltage

VGH VGL VGH-VGL

Operation Temperature Storage Temperature LED Reverse Voltage LED Forward Current

TOP TST VR IF

-0.3 6.5 -0.3 -20.0 - -20 -30 - -

Max. 5.0 13.5 40.0 0.3 40.0 70 80 1.2 25

V V V V V ℃ ℃ V mA

Each LED Note 2 Each LED

Unit

Remark

Note 1: The absolute maximum rating values of this product are not allowed to be exceeded

at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed. Note 2: VR Conditions: Zener Diode 20mA

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:6/20

3.1.1. Typical Operation Conditions

( Note 1)

Values

Item

Symbol

Min.

DVDD AVDD

Power voltage

VGH VGL

Input signal voltage Input logic high voltage Input logic low voltage

VCOM VIH VIL

(15.3) (-7.7) - 0.7 DVDD

0

(16.0) (-7.0) TBD - -

(16.7) (-6.3) - DVDD 0.3 DVDD

V V V V

Note 3

V

3.0 (10.2)

Typ. 3.3 (10.4)

Max. 3.6 (10.6)

V V

Note 2

Unit

Remark

Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH.

Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of

customer’s system board.

Note 3: DCLK,HS,VS,RESET,U/D, L/R,DE,R0~R7,G0~G7,B0~B7,MODE,DITHB.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:7/20

3.1.2. Current Consumption

Symbol

Item

IGH IGL

Current for Driver

IDVDD IAVDD

- -

TBD TBD

- -

mA mA

DVDD =3.3V AVDD =10.4V

Values

Unit

Min. - -

Typ. TBD TBD

Max. - -

mA mA

VGH =17.0V VGL = -5.0V Remark

3.1.3. Backlight Driving Conditions

Values

Item

Symbol

Min.

Voltage for LED backlight Current for LED backlight LED life time

Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IL =180mA.

Note 2: The “LED life time” is defined as the module brightness decrease to 50% original

brightness at Ta=25℃ and IL =180mA. The LED lifetime could be decreased if operating IL is lager than 180mA.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

VL IL -

(9.3) (170) 20,000

Typ. (9.9) (180) -

Max. (10.5) (200) -

V mA Hr

Note 1 Note 2

Unit

Remark

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:8/20

3.2. Power Sequence

a. Power on:

DVDD→VGL→VGH→Data→B/L

B/L→Data→VGH→VGL→DVDD

Note: Data include R0~R7, B0~B7, GO~G7, U/D, L/R, DCLK, HS,VS,DE.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:9/20

3.3. Timing Characteristics

3.3.1. AC Electrical Characteristics

Values

Item

HS setup time HS hold time VS setup time VS hold time Data setup time Data hole time DE setup time DE hole time

DVDD Power On Slew rate RESET pulse width DCLK cycle time DCLK pulse duty

Symbol

Min.

Thst Thhd Tvst

Tvhd Tdsu Tdhd Tesu Tehd TPOR TRst Tcoh Tcwh

8 8 8 8 8 8 8 8 - 1 20 40

Typ. - - - - - - - - - - - 50

Max. - - - - - - - - 20 - - 60

ns ns ns ns ns ns ns ns ms

From 0 to 90% DVDD Unit

Remark

ms ns %

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:10/20

3.3.2. Data Input Format

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:11/20

3.3.3. Timing

Values

Item

Symbol

Min.

Horizontal Display Area DCLK Frequency One Horizontal Line HS pulse width HS Blanking HS Front Porch

Values

Item

Vertical Display Area VS period time VS pulse width VS Blanking VS Front Porch

Symbol

Min.

tvd tv tvpw tvb tvfp

- 510 1 23 7

Typ. 480 525 - 23 22

Max. - 650 20 23 147

TH TH TH TH TH Unit

Remark

thd fclk th thpw thb thfp

- 26.4 862 1 46 16

Typ. 800 33.3 1056 - 46 210

Max. - 46.8 1200 40 46 354

DCLK MHz DCLK DCLK DCLK DCLK Unit

Remark

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:12/20

4. Optical Specifications

Values

Item

Symbol

Condition

Min.

θL

Viewing angle (CR≥ 10)

θR θT θB TON

Response time

TOFF

Contrast ratio

CR WX

Color chromaticity

WY

Luminance

L

Normal θ=Φ=0°

- 400 0.26 0.28 200

15 500 0.31 0.33 250

30 - 0.36 0.38 -

msec - - - cd/m²

Note 3 Note 4 Note 2 Note 5 Note 6 Note 6

Φ=180°(9 o’clock) Φ=0°(3 o’clock) Φ=90°(12 o’clock) Φ=270°(6 o’clock)

60 60 40 60 -

Typ. 70 70 50 70 10

Max. - -

degree Note 1 - - 20

msec

Note 3

Unit

Remark

Luminance

YU 70 75 - % Note 7

uniformity

Test Conditions:

1. DVDD=3.3V, IL=180mA (Backlight current), the ambient temperature is 25℃. 2. The test systems refer to Note 2.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:13/20

Note 1: Definition of viewing angle range

Normal line θ=Φ=0°

Φ=90°

12 o’clock direction

θL

θT

θB

Φ=180°

Active Area

LCM Φ=270°

Fig. 4-1 Definition of viewing angle 6 o’clock direction

Note 2: Definition of optical measurement system.

The optical characteristics should be measured in dark room. After 30 minutes

operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1° /Height: 500mm.)

Photo detector Normal line θ=Φ=0°

Φ=90°

12 o’clock direction

500mm

Φ=180°

Active Area

LCM

Φ=270°

6 o’clock direction

Fig. 4-2 Optical measurement system setup

Φ=0°

Φ=0°

θR

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:14/20

Note 3: Definition of Response time

The response time is defined as the LCD optical switching time interval between

“White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%.

White (TFT OFF) Photo detector output (Relative value) 100% 90%

Black (TFT ON)

White (TFT OFF) 10% 0%

TON

Fig. 4-3 Definition of response time

TOFF

Note 4: Definition of contrast ratio

Contrast ratio (CR)=

Luminance measured when LCD on the \"White\" stateLuminance measured when LCD on the \"Black\" state

Note 5: Definition of color chromaticity (CIE1931)

Color coordinates measured at center point of LCD.

Note 6: All input terminals LCD panel must be ground while measuring the center area of

the panel. The LED driving condition is IL=180mA .

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:15/20

Note 7: Definition of Luminance Uniformity

Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area.

Luminance Uniformity(Yu)=

L-------Active area length W----- Active area width

Bmin

Bmax

LW/6L/6L/3L/3WW/3W/3 Fig. 4-4 Definition of measuring points

Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:16/20

5. Reliability Test Items

(Note3)

Item

High Temperature Storage Low Temperature Storage High Temperature Operation Low Temperature Operation Operate at High Temperature and Humidity Thermal Shock

Test Conditions

Ta = 80℃ 240hrs Ta = -30℃ 240hrs Ts = 70℃ 240hrs Ta = -20℃ 240hrs +60℃, 90%RH 240hrs -30℃/30 min ~ +80℃/30 min for a total 100 cycles, Start with cold temperature and end with high temperature.

Frequency range:10~55Hz Stroke:1.5mm

Sweep:10Hz~55Hz~10Hz

2 hours for each direction of X. Y. Z. (6 hours for total)

100G 6ms,±X, ±Y, ±Z 3 times for each direction

Random Vibration :

0.015G*G/Hz from 5-200HZ, -6dB/Octave from 200-500HZ

2 hours for each direction of X. Y. Z. (6 hours for total)

Height:60 cm

1 corner, 3 edges, 6 surfaces

± 2KV, Human Body Mode, 100pF/1500Ω

Remark Note 1，Note 4 Note 1，Note 4 Note 2，Note 4 Note 1，Note 4 Note 4

Note 4

Vibration Test

Mechanical Shock

Package Vibration Test

Package Drop Test Electro Static Discharge

Note 1: Ta is the ambient temperature of samples. Note 2: Ts is the temperature of panel’s surface.

Note 3: In the standard condition, there shall be no practical problem that may affect the

display function. After the reliability test, the product only guarantees operation, but don’t guarantee all of the cosmetic specification.

Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:17/20

6. General Precautions

6.1. Safety

Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water.

6.2. Handling

1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface.

2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages.

3. To avoid contamination on the display surface, do not touch the module surface with bare hands.

4. Keep a space so that the LCD panels do not touch other components.

5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages.

6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs.

7. Do not leave module in direct sunlight to avoid malfunction of the ICs.

6.3. Static Electricity

1. Be sure to ground module before turning on power or operating module. 2. Do not apply voltage which exceeds the absolute maximum rating value.

6.4. Storage

1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less. 2. Do not store the module in surroundings containing organic solvent or corrosive gas.

3. Store the module in an anti-electrostatic container or bag.

6.5. Cleaning

1. Do not wipe the polarizer with dry cloth. It might cause scratch.

2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer.

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:18/20

7. Mechanical Drawing

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:19/20

8. Package Drawing

8.1. Packaging Material Table

No. 1 2 3 4 5 6 7 8

Item LCM Module Partition Corrugated Paper

Corrugated Bar

Dust-Proof Bag A/S Bag Carton Total weight

Model (Material) AT070TN92

Dimensions(mm) 1.9 × 100.0 × 5.7

Unit Weight (kg) TBD 1.466 0.071 0.046 0.048 0.002 1.100

TBD

Quantity 50pcs 1set 4pcs 4pcs 1pcs 50pcs 1pcs

Remark

BC Corrugated

512 × 349 × 226

paper

B Corrugated 510 × 350

paper

B Corrugated 512 × 11 × 3

paper PE PE

Corrugated paper

700 × 530 180 × 133 × 0.2 530 × 355 × 255

8.1 Packaging Quantity

Total LCM quantity in Carton: no. of Partition 2 Rows × quantity per Row 25 = 50

The copyright belongs to InnoLux. Any unauthorized use is prohibited.

INNOLUX SPEC NO.: A070-92-TT-01 Date :2009/01/12

Page:20/20

8.2 Packaging Drawing

The copyright belongs to InnoLux. Any unauthorized use is prohibited.