Pd035VC0L-0701-Ver0.2

Pd035VC0L-0701

Ver0.2(preliminary)

TFT LCD Product Specification

Model Number: Pd035VC0L-0701

Customer:

Approved by:

Date:

Note: Empty cell

With NTSC 60% CF

Company Chop:

Perfect Display Limited Tel: (852) 2333 3914 Fax: (852) 2333 3924

Reference number: F03507-01D Ver0.1

1/24

Pd035VC0L-0701

Ver0.2(preliminary)

- CONTENTS -

REVISION HISTORY ............................................................................................................................................3

1. Product Features ...............................................................................................................................................4 2. General Rules of Single Panel............................................................................................................................4 2.1. Outline Dimension …………………………………………………………………………………………...5 2.2. FPC Detail ……………………………………………………………………………………………………6 2.3. Test Pad ……………………………………………………………………………………………………….7 3. PIN Assignment…...……………………………………………………...………………………………………8

3.1 FPC/IC Pin Assignment table……………………………………………………………….………………....8 3.2 Schematic Panel layout ……………………………………………………………………………………….16 4. Cell Details.........................................................................................................................................................17 4.1. Seal Pattern / AU Patten…………………………………………………………………………………….…17 5. Electrical specification……………………………………………………………………………………………18 6. Optical specifications (light source: C light, using CMO TN LC + Polarizer , reference only) ......................19 7. Reliability specification …………………………………………………………………………………………..21 8. Order Information .............................................................................................................................................22 Appendix A:perfect cell Numbering Rule.................................................................................................................23 Appendix B:Handling precautions.............................................................................................................................24

2/24

Pd035VC0L-0701

Ver0.2(preliminary)

REVISION HISTORY Version Data Ver0.1

2007/7/30

Page (New) All 17

Section Description All

Preliminary Product Specification was the First Issue.

Ver0.2 2007/8/13 4.0 Revise Seal pattern drawing

3/24

Pd035VC0L-0701

Ver0.2(preliminary)

1.0 Product Features

Pd0035VC0L-0701 is a 3.5\" TFT-LCD (Thin Film Transistor Liquid Crystal Display) dedicated for Video. The

TFT-LCD will be applied to a high transmittance mode TFT-LCD product.

2.0 General Rules of Single Panel

Item Specification Unit Substrate thickness Panel outline dimension Active screen size t

0.5

75.1(H)X61.9(V)X1.0(D)

mm mm

3.5″diagonal Resolution 320RGBX240 pixel Pixel driving element Pixel size Pixel arrangement View direction(Gray inversion) Driver IC Pre-tilt angle Cell gap Operation temperature range(LC5091) Storage temperature range (LC5091)

a-Si TFT 73X219 RGB-Stripe 12 o’clock HX8238-A

- Um - - -

3～5 degree 4.7±0.3 -20～+70 -30～+80

Um ℃ ℃

4/24

Pd035VC0L-0701

Ver0.2(preliminary)

2.1. Outline Dimension

Note:The unmarked dimension tolerance is ±0.2mm,The total thickness of panel is 1.0±0.1mm

The highness of cell chip is 1.0mmMAX and the lengh is 12.0mmMAX

5/24

Pd035VC0L-0701

Ver0.2(preliminary)

2.2. FPC Detail

Note:The ITO dimension needn’t inspect

6/24

Pd035VC0L-0701

Ver0.2(preliminary)

2.3. Test PAD

Test pads are used to test the cell’s display function before driver IC is bonded. The test function will be cancelled automatically when driver IC and FPC are bonded. Testing pre-requirements and performances:

• Proper installation of polarizer.

• Corresponding driving voltages and waveform are required.

• Test mode can lights the whole panel to Black, White, different Gray levels and R,G,B • Light pixel or Dead pixel can be investigated under test mode.

Test Method: GG=20V,Gate_odd=15V,Gate_Even=15V,VCOM=0V,Data=0V+/-4V(different gary level). Note: The dimension of test pads needn’t inspect

7/24

Pd035VC0L-0701

Ver0.2(preliminary)

3.0 PIN ASSIGNMENT 3.1 FPC/IC Pin Assignment table

8/24

Pd035VC0L-0701

Ver0.2(preliminary)

9/24

Pd035VC0L-0701

Ver0.2(preliminary)

10/24

Pd035VC0L-0701

Ver0.2(preliminary)

11/24

Pd035VC0L-0701

Ver0.2(preliminary)

12/24

Pd035VC0L-0701

Ver0.2(preliminary)

13/24

Pd035VC0L-0701

Ver0.2(preliminary)

14/24

Pd035VC0L-0701

Ver0.2(preliminary)

15/24

Pd035VC0L-0701

Ver0.2(preliminary)

3.2

16/24

Pd035VC0L-0701

Ver0.2(preliminary)

4.0 Cell Details

17/24

Pd035VC0L-0701

Ver0.2(preliminary)

5.0 ELECTRICAL SPECIFICATION

Note: (1) Vcom must be adjusted to optimize display quality: cross talk, contrast ratio and etc. (2) VGH is TFT gate operating voltage (3) VGL is TFT gate operating voltage

The storage capacitance structure of this product is Cst(Storage on Common).

The low voltage level of VGL signal must be fluctuated with same phase as Vcom, in case of Storage on

Gate structure.

(4) Environmental condition: 25±5℃

18/24

Pd035VC0L-0701

Ver0.2(preliminary)

6.0 Optical specifications(light source: C light,using CMO TN LC+Polarizer,reference only)

*Note (1) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63 L0: Luminance of gray level 0 CR = CR (10)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5).

*Note (2) Definition of Response Time (TR, TF):

19/24

Pd035VC0L-0701

Ver0.2(preliminary)

*Note(3) Definition of Viewing Angle

*** The above “Viewing Angle” is the measuring position with Largest Contrast Ratio; not for good image quality. View Direction for good image quality is 12 O’clock. Module maker can increase the “Viewing Angle” by applying Wide View Film.

*Note (4) Measurement Set-Up:

The LCD module should be stabilized at a given temperature for 20 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 20 minutes in a windless room.

20/24

Pd035VC0L-0701

Ver0.2(preliminary)

*Note (5)

7.0 RELIABILITY SPECIFICATION

Reliability Test Criteria:

Display function should be no change under normal operating condition.

21/24

Pd035VC0L-0701

Ver0.2(preliminary)

8.0 Order Information

Item Part Number 1 2

Remark

Pd035VC0L-0701 - - -

22/24

Pd035VC0L-0701

Ver0.2(preliminary)

Appendix A: Perfect Cell Numbering Rule

; S＝128X128

23/24

Pd035VC0L-0701

Ver0.2(preliminary)

Appendix B: Handling Precautions

Handling

1. Refrain from strong mechanical shock and / or any force to the panel. In addition to damage, this may improper operation or damage to the panel.

2. Wipe off water droplets or oil immediately. If you leave the droplets for a long time, staining and

discoloration may occur.

3. If the liquid crystal material leaks from the panel, it should be kept away from the eyes or month. In case of contact with hands, legs or clothes, it must be washed away thoroughly with soap. 4. Protect the panel from static; it may cause damage to the CMOS devices.

5. Use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and

assembly process.

6. Pins of I/F connector shall not be touched directly with bare hands.

Storage

1. Do not leave the panel in high temperature, and high humidity for a long time. It is highly

recommended to store the panel with temperature from 0 to 35C and relative humidity of less than 70%. 2. The panel shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent light during

the store.

Operation

1. The LCD shall be operated within the limits specified. Operation at values outside of these limits may

shorten life, and/or harm display images.

2. Do no exceed the absolute maximum rating value.

3. If the panel displays the same pattern continuously for a long period of time, it can be a image marked

on the screen.

24/24