Title
Using the hands-free phone system (for cellular phone)Making a phone callSetting a cellular phoneSecurity and system setupUsing the phone book
PageP. 270P. 278P. 284P. 289P. 292
nConditions affecting operation
The hands-free phone system may not operate normally in the following situ-ations:
lThe cellular phone is turned off, or located outside the service area.lThe cellular phone has a low battery.
lThe cellular phone is not connected to the system.
lThe cellular phone is behind the seat or in the glove box, or metal mate-rial covers or touches the phone.
nWhen transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improp-erly accessed.
∗: If equipped
266
nRequired profiles for the cellular phonelHFP (Hands Free Profile) Ver. 1.0lOPP (Object Push Profile) Ver. 1.1
If your cellular phone does not support HFP, the Bluetooth® phone cannot beentered and OPP serviced cannot be provided separately.nTrademark owned by Bluetooth SIG. Inc.
3
nCertification for the hands-free phone system
Interior featuresFCC ID: ACJ932C5ZZZ035IC ID: 216J-C5ZZZ035MADE IN JAPAN/MEXICO
NOTE:
This device complies with Part 15 of the FCC Rules and RSS-210. Opera-tion is subject to the following two conditions: (1) This device may not causeharmful interference, and (2) This device must accept any interferencereceived, including interference that may cause undesired operation.
267
NOTICE:
This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. How-ever, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures:
lReorient or relocate the receiving antenna.
lIncrease the separation between the equipment and receiver.
lConnect the equipment into an outlet on a circuit different from that towhich the receiver is connected.
lConsult the dealer or an experienced radio/TV technician for help.FCC WARNING:
Changes or modifications in construction not expressly approved by theparty responsible for compliance could void the user's authority to operatethe equipment.CAUTION:
Radio Frequency Radiation Exposure
This equipment complies with FCC/IC radiation exposure limits set forth foruncontrolled equipment and meets the FCC radio frequency (RF) ExposureGuidelines in Supplement C to OET65 and RSS-102 of the IC radio fre-quency (RF) Exposure rules. This equipment has very low levels of RFenergy that it deemed to comply without maximum permissive exposureevaluation (MPE). But it is desirable that it should be installed and operatedwith at least 20 cm and more between the radiator and person’s body(excluding extremities: hands, wrists, feet and legs).Co-location:
This transmitter must not be co-located or operated in conjunction with anyother antenna or transmitter.
268
CAUTION
nCaution while driving
Do not use a cellular phone or connect the Bluetooth® phone.
NOTICEnTo prevent damage to a cellular phoneDo not leave a cellular phone in the vehicle. The temperature inside maybecome high resulting in damage to the phone.3
Interior features269
nAudio unitDisplays such items asmessages, name, andphone numberLower-case characters andspecial characters, such asan umlaut, cannot be dis-played.Selects items such as menuor numberTurn: Selects an itemPress: Inputs the selecteditemPress and hold: Displaysinformation that is too longto be displayed at one timeon the screenSelects speed dialsDisplays the reception levelDisplays Bluetooth® con-nection conditionIf “BT” is not displayed, thehands-free phone systemcannot be used.∗: If equipped
270
3-3. Using the hands-free phone system (for cellular phone)nSteering wheel telephone switchesVolumeThe voice guidance volumecannot be adjusted usingthis button.Hands-free phone systemoff/ends a call/refuses a callHands-free phone systemon/starts a callPress: Voice command sys-tem onPress and hold: Voice com-mand system off3Interior featuresnMicrophone271
Operating the system using a voice command
By following voice guidance instructions output from the speaker,voice commands can be given to allow for operation of the hands-free phone system without checking the display or operating nOperation procedure when using a voice commandPress (→P. 274)
nAuxiliary commands when using a voice command
The following auxiliary commands can be used when operating thesystem using a voice command:
Cancel: Exits the hands-free phone system
Repeat: Repeats the previous voice guidance instructionGo back: Returns to the previous procedure
Help: Reads aloud the function summary if a help comment isregistered for the selected function
and say a command for a desired function. .272
Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary to registera cellular phone in the system. The phone registration mode will beentered automatically when starting the system with no cellularphone registered. Follow the procedure below to register a cellularphone:
STEP 1 Press or .The introductory guidance and phone name registration instructionsare heard.
STEP 2 Register a phone name by either of the following methods.3
a.Select “Record Name” using registered.b.Press , and say a name to beInterior features and say a name to be registered.A voice guidance instruction to confirm the input is heard.
STEP 3 Select “Confirm” using a voice command or .A passkey is displayed and heard, and a voice guidance instructionfor inputting the passkey into the cellular phone is heard.
STEP 4 Input the passkey into the cellular phone.Refer to the manual that comes with the cellular phone for the oper-ation of the phone.
Guidance for registration completion is heard.
273
Menu list of the hands-free phone systemnNormal operation
First menu
Second menu
-Third menu
Operation detailDialing a number stored in the incoming call history memory
Dialing a number stored in the outgoing call history memory
Dialing by inputting a numberDialing by inputting a name registered in the phone bookAdding a new numberChanging a name in the phone book
Deleting the phone book data
Callback-
RedialDial by numberDial by name
--
--Add EntryChange NameDelete EntryDelete Speed Dial
(Del Spd Dial)List NamesSet Speed Dial (Speed Dial)
-----
Phonebook
-
Deleting a registered speed dial
-Listing the phone book data
-Registering a speed dial
274
First menu
Second menu
Third menuSet PIN
Operation detailSetting a PIN codeLocking the phone bookUnlocking the phone bookRegistering the cellular phone to be used
Changing a registered name of a cellular phone
Deleting a registered cellular phone
Listing the registered cellular phones
Selecting a cellular phone to be used
Changing the passkeySetting voice guidance vol-umeInitialization
3
Security
Phonebook LockPhonebook UnlockPair PhoneChange Name
Setup
Phone Setup
DeleteList PhonesSelect PhoneSet Passkey
Interior featuresSystem Setup
Guidance Vol-ume
(Guidance Vol)Initialize
275
nUsing a short cut key
First menuDial “XXX (name)”Phone book add entry
Phone book change name
Phone book delete entry
Phone book list names
Phone book set speed dial
Phone book delete speed dialPhonebook
Second menu
--Operation detailDialing a number registered in the phone bookAdding a new numberChanging the name of a phone number in the phone book
Deleting phone book dataListing the phone book dataRegistering a speed dialDeleting a speed dialUnlocking the phone bookLocking the phone book
-
----Phonebook UnlockPhonebook Lock
276
nAutomatic adjustment of volume
When vehicle speed is 50 mph (80 km/h) or more, the volume automaticallyincreases. The volume returns to the previous volume setting when vehiclespeed drops to 43 mph (70 km/h) or less.nWhen using a voice command
lFor numbers, say a combination of single digits from zero to nine, #(pound), ∗ (star), and + (plus).lSay a command correctly and clearly.
nThe system may not recognize your voice in the following situations:lWhen driving on a rough roadlWhen driving at high speeds
lWhen air is blowing out of the vents onto the microphonelWhen the air conditioning fan emits a loud noisenThe following cannot be performed while driving:lOperating the system with lRegistering a cellular phone to the systemnChanging the passkey→P. 287
Interior features277
3
nMaking a phone call
lDialing by inputting a number“Dial by number”lDialing by inputting a name“Dial by name”lSpeed dialing
lDialing a number stored in the outgoing history memory“Redial”lDialing a number stored in the incoming history memory“Call back”nReceiving a phone calllAnswering the phonelRefusing the callnTransferring a call
nUsing the call history memorylDialing
lStoring data in the phone booklDeleting
278
Dialing by inputting a number
STEP 1 Press and say “Dial by number”.STEP 2 Press and say the phone number.STEP 3 Dial by one of the following methods:a.Press .b.Press and say “Dial”.c.Select “Dial” using .3
Interior features279
Dialing by inputting a name
STEP 1 STEP 2 Press and say “Dial by name”.Select a registered name to be input by either of the followingmethods:a.Press b.Press and say a registered name. and say “List names”. Press while thedesired name is being read aloud.STEP 3 Dial by one of the following methods:a.Press .b.Press and say “Dial”. .c.Select “Dial” using Speed dialingSTEP 1 STEP 2 Press .Press the preset button in which the desired number is regis-tered.
Press .
STEP 3 280
When receiving a phone callnAnswering the phonePress .nRefusing the callPress .Transferring a callA call can be transferred between the cellular phone and systemwhile dialing or receiving a call, or during a call. Use one of the follow-ing methods:
a.Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-ation of the phone.*1
b.Press .
3
Interior featuresc.Press *1
and say “Call Transfer” *2.
: This operation can be performed only when transferring a callfrom the cellular phone to the system during a call.
: While the vehicle is in motion, a call cannot be transferred fromthe system to the cellular phone.
*2
281
Using the call history memory
Follow the procedure below to use a number stored in the call historymemory:
STEP 1 Press and say “Redial” (when using a number storedin the outgoing call history memory) or “Call back” (whenusing a number stored in the incoming call history memory).
STEP 2 Select the number by either of the following methods:a.Say “Previous” or “Go back” until the desired number is dis-played.b.Select the desired number using .The following operations can be performed:Dialing: Press .Storing the number in the phone book: Select “Store” using a voicecommand or . . or select “Dial” using a voice command orDeleting: Select “Delete” using a voice command or 282
nCall history
Up to 5 phone numbers can be stored in each of the outgoing and incomingcall history memories.nWhen talking on the phone
lDo not talk simultaneously with the other party.
lKeep the volume of the received voice down. Otherwise, voice echo willincrease.
3
Interior features283
Registering a cellular phone in the hands-free phone system allowsthe system to function. The following functions can be used for reg-istered cellular phones:nFunctions and operation proceduresTo enter the menu for each function, follow the steps below using avoice command or :lRegistering a cellular phone 1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”lSelecting the cellular phone to be used 1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”lChanging a registered name 1. “Setup” → 2. “Phone Setup” → 3. “Change Name”lListing the registered cellular phones 1. “Setup” → 2. “Phone Setup” → 3. “List Phones”lDeleting a cellular phone 1. “Setup” → 2. “Phone Setup” → 3. “Delete”lChanging the passkey 1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”Registering a cellular phone
Select “Pair Phone” using a voice command or procedure for registering a cellular phone. (→P. 273)
, and do the284
Selecting the cellular phone to be used
Select “Select Phone” using a voice command or .STEP 1 Pattern A
STEP 2 Select the cellular phone to be used by either of the followingmethods, and select “Confirm” using a voice command or
:a.Press b.Press and say the desired phone name. and say “List phones”. While the name of the .3
Interior featuresdesired cellular phone is being read aloud, press Pattern B
STEP 2 Select the cellular phone to be used using .Changing a registered name
Select “Change Name” using a voice command or .STEP 1 STEP 2 Select the name of the cellular phone to be changed by one ofthe following methods:a.Press and say the desired phone name, and select .“Confirm” using a voice command or 285
b.Press and say “List phones”. While the desired ..phone name is being read aloud, press c.Select the desired phone name using STEP 3 Press a new name.
or select “Record Name” using , and saySTEP 4 Select “Confirm” using a voice command or .Listing the registered cellular phones
Selecting “List Phones” using a voice command or causes thelist of registered cellular phones to be read aloud.
When listing is complete, the system returns to “Phone Setup”.Pressing while the name of a cellular phone is being readselects the cellular phone, and the following functions will be avail-able:
•Selecting a cellular phone: “Select Phone”•Changing a registered name: “Change Name”•Deleting a cellular phone: “Delete”
286
Deleting a cellular phone
Select “Delete” using a voice command or .STEP 1 Pattern A
STEP 2 Select the cellular phone to be deleted by either of the follow-ing methods and select “Confirm” using a voice command or
:a.Press phone.
and say the name of the desired cellular3
Interior featuresb.Press and say “List phones”. While the name of the.desired cellular phone is being read aloud, press Pattern B
STEP 2 Select the desired cellular phone to be deleted using .Changing the passkey
Select “Set Passkey” using a voice command or .STEP 1 Pattern A
STEP 2 Press , say a 4 to 8-digit number, and select “Confirm” .using a voice command or 287
Pattern B
STEP 2 Select a 4 to 8-digit number using The number should be input 1 digit at a time.
.STEP 3 When the entire number to be registered as a passkey hasbeen input, press once again.nThe number of cellular phones that can be registeredUp to 6 cellular phones can be registered in the system.
288
To enter the menu of each setting, follow the steps below:nSecurity setting items and operation procedurelSetting or changing the PIN (Personal Identification Number) 1. “Setup” → 2. “Security” → 3. “Set PIN”lLocking the phone book 1. “Setup” → 2. “Security” → 3. “Phonebook Lock”lUnlocking the phone book 1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”nSystem setup items and operation procedurelSetting voice guidance volume 1. “Setup” → 2. “System Setup” → 3. “Guidance Vol”lInitialization 1. “Setup” → 2. “System Setup” → 3. “Initialize” can only be used for system setup operation.3
Interior featuresSetting or changing the PINnSetting a PIN
STEP 1 Select “Set PIN” using a voice command or Enter a PIN using a voice command or . .STEP 2 When using , input the code 1 digit at a time.nChanging the PIN
STEP 1 Select “Set PIN” using a voice command or .289
STEP 2 Enter the registered PIN using a voice command or Enter a new PIN using a voice command or ..STEP 3 When using , input the code 1 digit at a time.Locking or unlocking the phone book
STEP 1 Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock(Phbk Unlock)” using a voice command or .STEP 2 Input the PIN by either of the following methods and select“Confirm” using a voice command or :a.Press and say the registered PIN. .b.Input a registered PIN using Setting voice guidance volume
Select “Guidance Vol” using .STEP 1 STEP 2 Change the voice guidance volume.To decrease the volume: Turn counterclockwise.To increase the volume: Turn clockwise.290
Initialization
Select “Initialize” and then “Confirm” using Select “Confirm” using . .STEP 1 STEP 2 nInitialization
lThe following data in the system can be initialized:
•Phone book
•Outgoing and incoming call history•Speed dials
•Registered cellular phone data•Security code
lOnce the initialization has been completed, the data cannot be restoredto its original state.
nWhen the phone book is lockedThe following functions cannot be used:lDialing by inputting a namelSpeed dialing
lDialing a number stored in the call history memorylUsing the phone book
3
Interior features291
To enter the menu of each setting, follow the steps below:lAdding a new phone number 1. “Phonebook” → 2. “Add Entry”
lSetting speed dial
1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”lChanging a registered name
1. “Phonebook” → 2. “Change Name”lDeleting registered data
1. “Phonebook” → 2. “Delete Entry”
lDeleting speed dial
1. “Phonebook” → 2. “Delete Speed Dial (Del Spd Dial)”lListing the registered data
1. “Phonebook” → 2. “List Names”
Adding a new phone number
The following methods can be used to add a new phone number:lInputting a phone number using a voice commandlTransferring data from the cellular phonelInputting a phone number using lSelecting a phone number from outgoing or incoming call history
292
nAdding procedure
STEP 1 STEP 2 Select “Add Entry” using a voice command or .Use one of the following methods to input a phone number:Inputting a phone number using a voice command
STEP2-1:Select “By Voice” using a voice command or .STEP2-2:Press , say the desired number, and select3
“Confirm” using a voice command.Transferring data from the cellular phone
STEP2-1:Select “By Phone” and then “Confirm” using a voice
Interior featurescommand or .STEP2-2:Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone forthe details of transferring data.
STEP2-3:Select the data to be registered by either of the fol-lowing methods:
a.Say “Previous” or “Next” until the desired data isdisplayed, and select “Confirm” using a voicecommand.b.Select the desired data using .293
Inputting a phone number using STEP2-1:Select “Manual Input” using STEP2-2:Input a phone number using ..Input the phone number 1 digit at a time.
STEP2-3:When the entire number has been input, press
once again.Selecting a phone number from outgoing or incoming call history
STEP2-1:Select “Call History” using a voice command or
.STEP2-2:Select “Outgoing” or “Incoming” using a voice com-mand or .STEP2-3:Select the data to be registered by either of the fol-lowing methods:
a.Say “Previous” or “Go back” until the desireddata is displayed, and select “Confirm” using avoice command.b.Select the desired data using .294
STEP 3 Select the name to be registered by either of the followingmethods, and select “Confirm” using a voice command or
:a.Press and say the desired name. , and say the desiredb.Select “Record Name” using name.
STEP 4 Select “Confirm” using a voice command or .3
In STEP 3 , selecting “Set Speed Dial (Speed Dial)” instead of “Con-firm” registers the newly added phone number as a speed dial.Interior featuresSetting speed dials
STEP 1 Select “Set Speed Dial (Speed Dial)” using a voice commandor .
STEP 2 Select the data to be registered as a speed dial by one of thefollowing methods:a.Press , say desired name, and select “Confirm” .
using a voice command or 295
b.Press , and say “List names”. While the desired , and select “Con- . .name is being read aloud, press firm” using a voice command or c.Select the desired data using STEP 3 Select the desired preset button, and register the data intospeed dial by either of the following methods:
a.Press the desired preset button, and select “Confirm” usinga voice command or .b.Press and hold the desired preset button.
Changing a registered name
Select “Change Name” using a voice command or .STEP 1 STEP 2 Select the name to be changed by one of the following meth-ods.a.Press , say desired name, and select “Confirm” .
using a voice command or 296
b.Press , and say “List names”. While the desired , and select “Con- . .name is being read aloud, press firm” using a voice command or c.Select the desired name using STEP 3 Press a new name.
or select “Record Name” using , and say3
Interior featuresSTEP 4 Select “Confirm” using a voice command or .Deleting registered data
Select “Delete Entry” using a voice command or .STEP 1 Pattern A
STEP 2 Select the data to be deleted by either of the following meth-ods, and select “Confirm” using a voice command or :a.Press , and say the name of the desired phonenumber to be deleted.297
b.Press , say “List phones”. While the name of the .desired phone number is being read aloud, press Pattern B
STEP 2 Select the data to be deleted using .Deleting speed dials
STEP 1 Select “Delete Speed Dial (Del Spd Dial)” using a voice com-mand or .STEP 2 Press the preset button in which the desired speed dial is reg-istered, and select “Confirm” using a voice command or
.Listing the registered data
Selecting “List names” using a voice command causes a list of theregistered data to be read aloud.
When listing is complete, the system returns to “Phonebook”.Pressing while the desired data is being read aloud selectsthe data, and the following function will be available.••••
Dialing: “Dial”
Changing a registered name: “Change Name”Deleting an entry: “Delete Entry”
Setting a speed dial: “Set Speed Dial (Speed Dial)”
298
nLimitation of number of digits
A phone number that exceeds 24 digits cannot be registered.
3
Interior features299
因篇幅问题不能全部显示，请点此查看更多更全内容